Which infrared profile should I use?
Which profile should you use to set a white balance for infrared photography? The free Infrared Profile Pack contains two profiles: Infrared Temp -50 and Infrared Temp -100. Let’s review which to use with 550nm, 590nm, 665nm, 720nm, and 830nm filters.
Show Video Transcript Hide Video Transcript
Transcript for Which infrared profile should I use?. Duration: 1:53.
- 0:00 Which profile should you use to set a white balance for infrared photography? The profiles in the free Infrared Profile Pack are key to achieving a good white balance in your infrared images. The pack includes two profiles for each camera, a negative 50 temperature shift and a negative 100
- 0:19 temperature shift. These negative values represent a downward shift in color temperature, which is required for white balancing the lower color temperatures of infrared light. Which one should you use? For images shot with a 550 or 590 nanometer filter, use Infrared Temp -100 as these filters
- 0:40 need the most temperature shift. For images shot with a 720 nanometer filter, I use Infrared Temp -50. These images still require a temperature shift, but just not as much. If I use a 665 nanometer filter, which falls in the middle of the other filters, I can use either one. If you're using
- 1:03 an 830 nanometer or greater filter, you don't need these profiles. You can use any monochrome profile, such as Adobe Monochrome, a camera monochrome profile, the profiles in the B&W profile group in Lightroom, or any other monochrome profile included with your editor. For color infrared images,
- 1:24 when using your picker to set a white balance, the color neutral elements of your image should be free from a color cast, regardless of which of the two profiles you're using. If the temperature value is too close to 2,000 or too close to 50,000, then you might not have a good white
- 1:42 balance. Switch to the other profile and try again. Ultimately, the numerical value of the temperature slider is less important than the ability to separate your colors.
Video: YouTube, Instagram, TikTok, Threads, Facebook

How to choose
You should select whichever profile allows you to set a good white balance. A good white balance is one where you are able to point the white balance picker to a neutral subject and the resulting Temp value falls between 2,000 and 50,000 kelvins. If the Temp value lands exactly on 2,000 kelvins or 50,000 kelvins, then switch to the other profile.


Why there are only two profiles
The color temperature of infrared light is around 900 kelvins, well below the 2,000 to 50,000 kelvins range of the Temp scale in Lightroom and Camera Raw. The purpose of the Infrared Temp profiles in the Infrared Profile Pack is to shift the color temperatures values in the Temp slider towards the infrared range. While the labels on the Temp slider will remain as 2,000 and 50,000, the color temperatures supported will be lower with negative temperature profile. The exact amount of shift required will vary depending on the filter you are using and your camera sensor.
I’ve tested profiles with a Temp adjustment of -25 and -75 to see that that level of granularity was required. Those additional profiles don’t offer any benefit over the -50 and -100 profiles. The -50 and -100 profiles cover nearly all of the cases I have tested. There is only one case I’ve observed where they did not work.1 As a result, the Infrared Profile Pack only includes profiles for -50 and -100, since that should provide enough color temperature shift for all high-pass filters.
Related
Comments
If you have comments, questions or feedback, use the comment section for this video.
-
The Kolari Vision IR Chrome, a multi-band bypass filter, produces slightly blue images and is close to being able to white balance within the default Temp range. A profile with a temp shift of +25 allows for a perfect white balance with the IR Chrome filter. ↩
